Hot water tank
Solar- Tank top52.4 °C
- Hot water out51.8 °C
- Circulation41.3 °C
- Tank return36.5 °C
- Solar flow–
- Solar return–
- Cold water in14.2 °C
- Burner
- off · heats to 47 °C
- Reheat from
- ≤ 41 °C
- Tank protection, circulation
- < 38 °C
Heating · Hot water · Rooms · Wednesday, 21 October
Hot water, circulation and rooms at a glance.
Solar mode: tank ≥ 50 °C or solar charging → 06:00–22:00 every 30 min.
| Widget | Datapoint | Note |
|---|---|---|
| Tank, solar, circulation | alias.0.Heizung.* | Source: ESPHome esphome.1.A4C1385E92D7 and BSB-LAN |
| Outdoor, flow | mqtt.0.BSB-LAN.* | 15030 Outdoor · 15032 Flow · 15021 Tank |
| Circulation pump | shelly.0.SHPLG-S#068CC2#1.Relay0.Switch | .Power for the power reading |
| Leo, Mia, Office | fritzdect.0.DECT_* | .tist actual · .tsoll target · .battery |
| Underfloor heating GF | alpha2.0.HEATAREA.<n> | Living room 1 · Kitchen 2 · Grandpa’s kitchen 4 · Grandpa’s living room 5 (T_ACTUAL, T_TARGET) |
Same project CSS as in the Home view, plus the pump impeller. Bind the class gh-spin to the pump’s switching state.
/* Impeller only spins while the pump is running */ .gh-spin svg{animation:gh-spin 1.4s linear infinite} @keyframes gh-spin{to{transform:rotate(360deg)}} @media (prefers-reduced-motion:reduce){ .gh-spin svg{animation:none!important} }
Example CSS class: gh-spin {v:shelly.0.SHPLG-S#068CC2#1.Relay0.Switch; v ? 'gh-spin' : ''}